plastic miller

High-yield Plastic Miller 1.Knife Use Import SKD-11 Material 2.No Environmental Pollution 3.Use Europe Type Belt Wheel 4

High-yield Plastic Miller

Application

   MF Series Plastic Pulverizer is a prefect machine for  processing  and grinding  thermoplastics material  such as HDPE, LDPE,LLDPE,ABS,PC, PS ,etc, with high output  and low power consumption.

Characteristics

With water cycle and wind cooling, the machine can be applied into processing heat sensitive material.  With the tail-wagging air stream (partly eddy flow) produced by the tail-wagging of the main shaft capstan of the machine, the input tail-wagging materials collide strongly with the board and the cutting blade, and was grinded into powdery (without sieving).Both the board and the cutting blade are made of abrasion-resistant steel, with excellent performance after heat treatment. With severeness of framework, the volume of the machine is quite small. If you open door closure, you can maintain it. It is completely airproof and without any dust leakage. With winding reclaiming equipment, the machine is features by cooling materials evenly, quick cooling and some other characteristics.

Main Technical Parameter

     

Model	MF-250	MF-350	MF-450	MF-550
Rotating Knife Diametermm	Ø 250	Ø 350	Ø 450	Ø 550
Main Motor Power(kw)	11	30	45	55
CoolingMethod	Water cooling
Fan Power	1.5 kw	3 kw	3 kw	5.5 kw
Vibrating Sieve Type	ZDS 600	ZDS 800	ZDS 1000	ZDS 1200
Capacity(kg/h)	About 50-120	About 120-290	About 300	About 480
Dimensions(mm)	1500×800×2800	1700×1500×3700	1800×1600×3800	1900×1700×3900
Weight(kg)	60	1300	1600	2200

plastic miller